Prev | Next

PhotoRealistic RenderMan

RenderMan procedural primitives are user-provided subroutines which manipulate private data structures containing geometric primitives that the renderer knows nothing about. There are two entry points for each procedural primitive, the subdivide method, and the free method. Each instance of a procedural primitive contains pointers to the appropriate methods, a blind (to the renderer) data pointer which points at data allocated by, and meaningful to, the methods, and a bounding box which completely contains any geometry of the primitive.

When the renderer reaches the bounding box of a particular procedural primitive instance, it calls the subdivide method, passing in the blind data pointer and a floating point number which indicates the number of pixels which the bounding box covers (called the detail). The subdivide method splits the primitive into smaller primitives. It can either generate standard RenderMan primitives, or it can generate more instances of procedural primitives with their own blind data pointers and (presumably smaller) bounding boxes, or some combination.

At some point, the renderer knows that it will not need a particular blind pointer ever again. It then calls the free routine to destroy that blind pointer. It is never safe for the subdivide routine to assume renderer behavior with respect to freeing data pointers. In particular, the renderer may free a blind pointer without ever subdividing it, or may subdivide a particular pointer multiple times.

Prior to PhotoRealistic RenderMan 3.7, the only way to create and use procedural primitives was to link the methods into a modeling program, along with the library version of PRMan (libprman.a). In PhotoRealistic RenderMan 3.7, three built-in procedural primitives will be available from inside the stand-alone renderer executable via simple RIB directives. Two of these are extension mechanisms, which allow users to create and execute their own procedural primitives which are loaded and evaluated at rendering time.

Delayed RIB File Reading

The simplest of the new RIB procedural primitives is Delayed Read Archive. The existing interface for "including" one RIB file into another is RiReadArchive. Delayed Read Archive operates exactly like RiReadArchive, except that the reading is delayed until the procedural primitive bounding box is reached, unlike RiReadArchive which reads RIB files immediately during parsing. The advantage of the new interface is that since the reading is delayed, memory for the read primitives is not used until the bounding box is actually reached. In addition, if the bounding box proves to be off-screen, the parsing time of the entire RIB file is saved. The disadvantage is that an accurate bounding box for the contents of the RIB file is required, which was never needed before.

In RIB, the syntax for the Delayed Read Archive primitive is:

Procedural "DelayedReadArchive" [ "filename" ] [ bound ]

In C, the syntax for calling the Delayed Read Archive primitive is:

RtString *data;
RtBound bound;
RiProcedural(data, bound, RiProcDelayedReadArchive, freedata)

RIB Generating Program

A more dynamic method of generating procedural primitives is to call a helper program which generates geometry on-the-fly in response to procedural primitive requests in the RIB stream. As will be seen below, each generated procedural primitive is described by a request to the helper program, in the form of an ASCII datablock which describes the primitive to be generated. This datablock can be anything which is meaningful and adequate to the helper program, such as a sequence of a few floating point numbers, a filename, or a snippet of code in a interpreted modeling language. In addition, as above, the renderer supplies the detail of the primitive's bounding box, so that the generating program can make decisions on what to generate based on how large the object will appear on-screen.

The generation program reads requests on its standard input stream, and emits RIB streams on its standard output stream. These RIB streams are read into the renderer as though they were read from a file (as with ReadArchive above), and may include any standard RenderMan attributes and primitives (including procedural primitive calls to itself or other helper programs). As long as any procedural primitives exist in the rendering database which require the identical helper program for processing, the socket connection to the program will remain open. This means that the program should be written with a loop which accepts any number of requests and generates a RIB "snippet" for each one.

The specific syntax of the request from the renderer to the helper program is extremely simple, as follows:

	fprintf(socket, "%g %s\n", detail, datablock);

The helper program's response should be to create a RIB file on stdout, presumably using the RIB client library, such as follows:

	RiBegin(RI_NULL);
	RiAttributeBegin();
		/* various attributes */
		/* various primitives */
	RiAttributeEnd();
	RiArchiveRecord(RI_COMMENT,"\377");
	RiEnd();

When the renderer is done with the helper program, it will close its end of the IPC socket, so reading an EOF on stdin is the signal for the helper program to exit.

In RIB, the syntax for specifying a RIB-generating program procedural primitive is:

Procedural "RunProgram" [ "program" "datablock" ] [ bound ]

In C, the syntax for calling the RIB-generating program procedural primitive is:

RtString *data;
RtBound bound;
RiProcedural(data, bound, RiProcRunProgram, freedata)

A more efficient method for accessing subdivision routines is to write them as dynamic shared objects (DSOs), and Dynamic Load them into the renderer executable at run-time. In this case, you write your subdivision and free routines exactly as you would if you were writing them to be statically linked with the renderer. They are compiled with special compiler options to make them run-time loadable, and you specify the name of the shared .so file in the RIB file. The renderer loads the DSO the first time it is needed to subdivide a primitive, and from then on, it is called as if (and executes as fast as if) it were statically linked.

When writing a procedural primitive DSO, you must create three specific public subroutine entry points, named Subdivide, Free and ConvertParameters. Subdivide is a standard RI procedural primitive subdivision routine, taking a blind data pointer to be subdivided, and a floating-point detail to estimate screen size. Free is a standard RI procedural primitive free routine, taking a blind data pointer which is to be released. ConvertParameters is a special routine which takes a string and returns a blind data pointer. It will be called for each Dynamic Load procedural primitive in the RIB file, and its job is to convert a printable string version of the progenator's blind data (which must be in ASCII in the RIB file), into something that the Subdivide routine will accept.

The ANSI-C prototypes for these three required entry points are as follows:

RtPointer ConvertParameters(RtString paramstr);
RtVoid Subdivide(RtPointer data, RtFloat detail);
RtVoid Free(RtPointer data);

RtPointer
ConvertParameters(RtString paramstr)
{
    RtFloat *radius_p;

    /* convert the string to a float */
    radius_p = (RtFloat *)malloc(sizeof(RtFloat));
    *radius_p = atof(paramstr);

    /* return the blind data pointer */
    return (RtPointer)radius_p;
}

RtVoid
Subdivide(RtPointer data, RtFloat detail)
{
    RtFloat *radius_p = (RtFloat *)data;

    /* output a sphere with the given radius */
    RiSphere( *radius_p, -*radius_p, *radius_p, 360.0, RI_NULL );
}

RtVoid
Free(RtPointer data)
{
    free(data);
}

Your C source code can call any RenderMan Interface routine exported by the SDK, as well as functions from other libraries that you may need. Next, the code must be compiled and linked to create the plugin itself; see the RenderMan Software Developers Kit (SDK) Overview for details.

In RIB, the syntax for specifying a dynamically loadable procedural primitive is:

Procedural "DynamicLoad" [ "dsoname" "initial" ] [ bound ]

In the above simple sphere example, an appropriate RIB file statement might be:

Procedural "DynamicLoad" ["a_sphere" "3.0" ] [-3 3 -3 3 -3 3]

In C, the syntax for calling the dynamic load primitive is:

RtString *data;
RtBound bound;
RiProcedural(data, bound, RiProcDynamicLoad, freedata)

Note that when the Subdivide routine wants to create a child procedural primitives of the same type as itself, it should call RiProcedural(data,bound,Subdivide,Free), not RiProcedural(asciidata,bound,RiProcDynamicLoad,RiProcDLFree).  

Procedural Primitive Pathnames

PRMan provides a mechanism for selecting among several compiled versions of a procedural program or plug-in, depending on which platform the RIB file is being rendered on. The renderer will expand the special strings $ARCH or %ARCH in pathnames for procedural primitive program and plug-ins, substituting a string that identifies the basic platform for which the running prman was built. For example:

Procedural "DynamicLoad" ["/net/prmanDSOs/$ARCH/a_sphere" ...]

The default architecture names are:

Default $ARCH name	PRMan build
linux-x86	Linux, 32-bit, for x86 systems
linux-x86-64	Linux, 64-bit, for x86-64 systems
windows-x86	Windows XP/Vista, 32-bit, for x86 systems
windows-x86-64	Windows Vista-64, 64-bit, for x86-64 systems
osx-x86	Mac OS X, 32-bit, for x86 systems
osx-x86-64	Mac OS X, 64-bit, for x86-64 systems

/architecture/default_name	new_name
/architecture/linux-x86	gcc41glibc24

Details and Notes

Prior to subdividing a procedural primitive, the renderer restores the graphics state to the state that existed when the procedural primitive was itself created. The subdivision routine can call any RI routine that is legal within the world scope, so it may modify any attribute in the graphics state machine before generating new primitives (procedural or otherwise). Thus, procedural primitives are free to manipulate the color, shaders, or any other attribute of their children.

Motion blur of procedural primitives is tricky. Procedural primitives, per se, cannot exist within motion blocks, because this would force the renderer to do some sort of correspondence matching between the children of the time 0.0 procedural primitive and the children of the time 1.0 procedural primitive. However, once the procedural primitive has decided to subdivide itself into standard RenderMan primitives, it is completely legal for those primitives to be emitted with full motion blocks. Thus, it is the responsibility of the procedural primitive methods themselves to understand "vertex motion" and generate the appropriate moving primitives at the leaf level. Note, however, that normal transformation matrix motion blur is perfectly legal on procedural primitives.

In situations where the renderer is unable to calculate the correct detail to pass into the subdivide method (for example, if the procedural primitive crosses the camera plane), the subdivision detail will be set to some extremely large number (quite possibly infinity). Subdivision methods must be able handle this case without generating infinite amounts of leaf data.

The RenderMan Interface has a command for modifying the detail which is sent to a procedural primitive. RiRelativeDetail is an attribute which provides a scaling factor for the details sent to the subdivision routine. This is a separate control from the RiShadingRate, which will determine the shading rate of the final "standard" RenderMan primitives that are generated. Unfortunately, there is no way for the procedural primitive to see the shading rate values.

If the bounding box of a child of a procedural primitive extends outside the bounding box of the parent, the resulting image will very likely have dropouts, however the renderer does not generate any warning messages in this case. Be sure that your bounding boxes do in fact contain all the geometry which will be generated at all lower levels.

Prev | Next